| A | B | C | D | E | |
|---|---|---|---|---|---|
1 | Unit | TM – 80 | |||
2 | A | B | C | ||
3 | INJECTION UNIT | ||||
4 | Screw Diametre | mm | 30 | 35 | 40 |
5 | Screw LD Ratio | 22 | 20.1 | 18.5 | |
6 | Shot Weight (Theoritical) | cm3 | 133 | 160 | 190 |
7 | Injection Weight (PS) | GMS | 121 | 146 | 173 |
8 | Injection Pressure | Mpa | 203 | 170 | 144 |
9 | Screw Speed | r/min | 0-225 | ||
10 | CLAMPING UNIT | ||||
11 | Clamp Tonnage | KN | 800 | ||
12 | Toggle Stroke | mm | 300 | ||
13 | Tie Bar Diameter | mm | 70 | ||
14 | Space Between Tie Bars | mm | 380*330 | ||
15 | Max. Mold Height | mm | 400 | ||
16 | Min. Mold Height | mm | 150 | ||
17 | Ejector Stroke | mm | 100 | ||
18 | Ejector Tonnage | KN | 38 | ||
19 | OTHERS | ||||
20 | Max. Pump Pressure | Mpa | 16 | ||
21 | Pump Motor Power | KW | 8 | ||
22 | Heater Power | KW | 5 | ||
23 | Machine Dimension (LxWxH) | m | 4 x 1.3 x 2.0 | ||
24 | Oiltank Cubage | L | 300 | ||
25 | Machine Weight | t | 3.5 | ||
