| A | B | C | D | E | |
|---|---|---|---|---|---|
1 | Unit | TMNT – 170 | |||
2 | A | B | C | ||
3 | INJECTION UNIT | ||||
4 | Screw Diametre | mm | 42 | 45 | 50 |
5 | Screw LD Ratio | 23.6 | 22 | 19.8 | |
6 | Shot Weight (Theoritical) | cm3 | 311 | 357 | 441 |
7 | Injection Weight (PS) | GMS | 283 | 325 | 402 |
8 | Injection Pressure | Mpa | 203 | 177 | 143 |
9 | Screw Speed | r/min | 0-180 | ||
10 | CLAMPING UNIT | ||||
11 | Clamp Tonnage | KN | 1700 | ||
12 | Toggle Stroke | mm | 435 | ||
13 | Tie Bar Diameter | mm | 80 | ||
14 | Space Between Tie Bars | mm | 470*470 | ||
15 | Max. Mold Height | mm | 500 | ||
16 | Min. Mold Height | mm | 180 | ||
17 | Ejector Stroke | mm | 140 | ||
18 | Ejector Tonnage | KN | 50 | ||
19 | OTHERS | ||||
20 | Max. Pump Pressure | Mpa | 16 | ||
21 | Pump Motor Power | KW | 18.5 | ||
22 | Heater Power | KW | 12.5 | ||
23 | Machine Dimension (LxWxH) | m | 5.1 x 1.5 x 2.2 | ||
24 | Oiltank Cubage | L | 170 | ||
25 | Machine Weight | t | 6 | ||
