| A | B | C | D | E | |
|---|---|---|---|---|---|
1 | Unit | TMNT – 130 | |||
2 | A | B | C | ||
3 | INJECTION UNIT | ||||
4 | Screw Diametre | mm | 38 | 42 | 45 |
5 | Screw LD Ratio | 24 | 22 | 20.5 | |
6 | Shot Weight (Theoritical) | cm3 | 226 | 277 | 318 |
7 | Injection Weight (PS) | GMS | 206 | 252 | 289 |
8 | Injection Pressure | Mpa | 208 | 171 | 149 |
9 | Screw Speed | r/min | 0-185 | ||
10 | CLAMPING UNIT | ||||
11 | Clamp Tonnage | KN | 1300 | ||
12 | Toggle Stroke | mm | 380 | ||
13 | Tie Bar Diameter | mm | 75 | ||
14 | Space Between Tie Bars | mm | 420*420 | ||
15 | Max. Mold Height | mm | 450 | ||
16 | Min. Mold Height | mm | 160 | ||
17 | Ejector Stroke | mm | 140 | ||
18 | Ejector Tonnage | KN | 50 | ||
19 | OTHERS | ||||
20 | Max. Pump Pressure | Mpa | 16 | ||
21 | Pump Motor Power | KW | 13 | ||
22 | Heater Power | KW | 8 | ||
23 | Machine Dimension (LxWxH) | m | 4.6 x 1.5 x 2.1 | ||
24 | Oiltank Cubage | L | 160 | ||
25 | Machine Weight | t | 4 | ||
