| A | B | C | D | E | |
|---|---|---|---|---|---|
1 | Unit | TM – 50 | |||
2 | A | B | C | ||
3 | INJECTION UNIT | ||||
4 | Screw Diametre | mm | 28 | 30 | 32 |
5 | Screw LD Ratio | 20.2 | 18.8 | 17.7 | |
6 | Shot Weight (Theoritical) | cm3 | 70 | 80 | 92 |
7 | Injection Weight (PS) | GMS | 64 | 73 | 84 |
8 | Injection Pressure | Mpa | 211 | 195 | 162 |
9 | Screw Speed | r/min | 0-200 | ||
10 | CLAMPING UNIT | ||||
11 | Clamp Tonnage | KN | 500 | ||
12 | Toggle Stroke | mm | 250 | ||
13 | Tie Bar Diameter | mm | 60 | ||
14 | Space Between Tie Bars | mm | 350*300 | ||
15 | Max. Mold Height | mm | 360 | ||
16 | Min. Mold Height | mm | 150 | ||
17 | Ejector Stroke | mm | 80 | ||
18 | Ejector Tonnage | KN | 28 | ||
19 | OTHERS | ||||
20 | Max. Pump Pressure | Mpa | 16 | ||
21 | Pump Motor Power | KW | 6 | ||
22 | Heater Power | KW | 5 | ||
23 | Machine Dimension (LxWxH) | m | 3.9 x 1.3 x 2.0 | ||
24 | Oiltank Cubage | L | 200 | ||
25 | Machine Weight | t | 3 | ||
