| A | B | C | D | E | |
|---|---|---|---|---|---|
1 | Unit | TM-20 | |||
2 | A | B | C | ||
3 | INJECTION UNIT | ||||
4 | Screw Diametre | mm | 19 | 22 | 25 |
5 | Screw LD Ratio | 20.5 | 17.7 | 15.5 | |
6 | Shot Weight (Theoritical) | cm3 | 22.6 | 30 | 38 |
7 | Injection Weight (PS) | GMS | 20.6 | 27 | 34 |
8 | Injection Pressure | Mpa | 280 | 209 | 162 |
9 | Screw Speed | r/min | 0-190 | ||
10 | CLAMPING UNIT | ||||
11 | Clamp Tonnage | KN | 200 | ||
12 | Toggle Stroke | mm | 200 | ||
13 | Tie Bar Diameter | mm | 50 | ||
14 | Space Between Tie Bars | mm | 270*255 | ||
15 | Max. Mold Height | mm | 265 | ||
16 | Min. Mold Height | mm | 150 | ||
17 | Ejector Stroke | mm | 65 | ||
18 | Ejector Tonnage | KN | 20 | ||
19 | OTHERS | ||||
20 | Max. Pump Pressure | Mpa | 14 | ||
21 | Pump Motor Power | KW | 4 | ||
22 | Heater Power | KW | 3.5 | ||
23 | Machine Dimension (LxWxH) | m | 3.3 x 1.3 x 1.5 | ||
24 | Oiltank Cubage | L | 170 | ||
25 | Machine Weight | t | 2.2 | ||
